How do I fill my S22 or S17 Tank?

Created by Emma Logan, Modified on Tue, 20 Sep, 2022 at 12:33 PM by Emma Logan

FOLLOW THESE STEPS to set up your S22 or S17-Tank (refer to diagrams or video below for more detail)


1. Unscrew the base of the vape tank and screw in the coil of your choice.If you've already installed a coil, you can skip this step.


2a. If you are using the new 'top-fill' S17 or S22 tank: When the base of the tank is screwed into the tank chamber, simply unscrew the mouthpiece from the top of the tank and squeeze your e-liquid into the filling holes at the side. Be careful not to get any e-liquid in the centre tunnel, as this may flood your coil. Replace the mouthpiece and leave to sit for 15 minutes if using a fresh coil.


2b. If you are using the older 'bottom-fill' S17 or S22 tank: Turn the tank chamber upside down and fill with e-liquid, making sure to fill no further than the neck of the central chimney tube. Replace the base of the tank (finger-tight only) and leave to sit for 15 mins prior to use if using a fresh coil, to ensure that the coil is properly saturated in e-liquid.




How to fill a topfill S17 or S22 tank:

How to fill a topfill S-17 or S-22 tank



How to fill a bottom-fill S-17 or S-22 tank:

How to fill a bottom-fill S-17 or S-22 tank

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article